WebThe Fisher 1B pump governor actuator is used to maintain a constant discharge pressure on steam-driven turbine or reciprocating pumps and for pressure reducing or pressure … WebSeat Materials(1)(2) Maximum Temperature Ranges of Body Materials(1)(2) Pressure Setting adjustment Handwheel Pressure Registration Internal with outside pressure source for differential pressure or pressure loading approximate Weights Type 95HD NPS 1/4 body: 4 pounds (2 kg) NPS 1/2 (DN 15) body: 8 pounds (4 kg) NPS 3/4 and 1 (DN 20 and 25) …
Fisher Type 627 Pressure Reducing Regulator, 1" - Control …
WebThe Type 630 can be converted in the field to a relief valve or is available as the Type 630R relief valve/backpressure regulator; refer to the separate Type 630R Bulletin (71.4:630R) for information. Features • High-Pressure Capabilities—Inlet pressures up to 1500 psig / 103 bar and control pressures up to 500 psig / 34.5 bar. Webthrough 1-inch ANSI classes 150 and 300 flanges, and 1/2 through 1-inch socket weld end connections are available. The standard orifice sizes are 1/4, 3/8 and 9/ 16-inch diameter, dependent on body sizes. Type 95HŠ Basically same as 95L, but permits higher reduced pressure ranges from 15 to 150 psig for the 1/ 4, 1/2, 3/4 and 1-inch sizes. port lavaca nursing and rehabilitation center
Fisher High Pressure Commercial Regulators
WebThe Type 289H should be set 10-inches w.c. (25 mbar) higher than the outlet pressure setting of the regulator, up to 30-inches w.c. (75 mbar) outlet pressure. For pressure greater than this, set the Type 289H 0.75 psi (0,05 bar) higher than … http://kfngs.com/data/catal/Type%20S200%20Series%20ENG_IM.pdf Webpersonnel when installing, operating, and maintaining the 1301 Series. high-pressure regulator. introduction. Scope of the Manual. This Instruction Manual provides instructions for. the installation, adjustment, maintenance, and. parts ordering of the Types 1301F and 1301G. high-pressure regulators. port lavaca inmate search